Tach Pick Up

Builders:

Below a look and an integrated system I developed. I’m holding a front alternator bracket. Threaded into the bracket is a very high quality sensor for a tach. It is tripped by two small AN-3 bolts, in precision CNC drilled holes in the ring gear. This is a compact arrangement using parts like the bracket and ring gear which are already doing a primary task. This gives 2 pulses per revolution, compatible with virtually all glass cockpits.

.

The sending unit is not cheap. It is made in the US by a very reputable company. I have it on my website as a service, the price I sell them for is $2 over what it costs me to buy them hand have them shipped to my place. But I like the way it works with the other parts to be a very simple and elegant installation. If you got a ring gear from me in the last few months, it came with the 3/16″ holes, alternator brackets have the 3/8-24 thread for the sensor. If you have earlier brackets or ring gear, you can drill these holes carefully in your shop. I’ll include the locations in a later video.

Several months ago I shared a look at testing eight different pickups and various locations on the ring gear. The is the final result for anyone building a plane with a glass cockpit.

WWJR

2 Replies to “Tach Pick Up”

  1. Hi William. Have you devised a solution for rear alternator engines? Also, if I built a bracket to align this in the right place is there any reason not to use it to count ring gear teeth instead of two bolts?

    Thanks, Gordon

Leave a Reply to William Wynne Cancel reply

This site uses Akismet to reduce spam. Learn how your comment data is processed.