Justin Peters Starlet progress in one hangar visit.
William Wynne
Builders,
Here are a few pictures to wrap up Justin’s 2.5 day hangar visit. It is a story of good times and great progress. As you read, make your own plan for progress this season.
.
.
Above, the finished motor mount. It was a lot of calculation, measurement and work, but we charged him the same price as one of our production mounts. I have always regarded Individual enthusiastic builders with unique projects as an opportunity to demonstrate my support of homebuilders. There are plenty of businesses which either ignore them or regard them as a deep pocket to be picked, but I have a very long track record of treating them more than fairly. The flip side of the coin is such builders must understand, and be patient for when we can do such work in our schedule. Justin is such a builder.
.
The intakes on the floor were test fit, the shiny one is a panther, the gray one is a Vagabond, a variant of a Zenith intake. Neither one fit, so we carefully measured for a custom one.
.
.
Above, Sunday morning was foggy, but Justin’s 3.0L Corvair put down a perfect test run. It had no issues at all, we just did a fine adjustment on the E/P-X ignition and it was good. The engine is built exclusively from parts from SPA and myself. Justin got started in the fall, and had the engine 95% ready by the end of the Barnwell Corvair College last November. Knowing we were going to build a mount, I asked him to bring the engine also. The engine turned 3,370 rpm on the test prop. We took an oil sample to send to Larry Nelson at Lab One, and after it cooled we used the engine to check for cowling options, intakes and exhausts.
.
.
Above, Justin holds an MA3-SPA carb in place while we study the space between the engine and firewall for a carb installation on a custom intake. He is very skilled with tools, he works HVAC as a regular career. That type of mechanical work makes for craftsmen who are good with hand tools, good at planning several steps ahead and good at diagnosing solutions, He is well suited to building a unique airframe. Most people new to homebuilding would be far better served by a more common airframe, but Justin’s skills and his willingness to enlist assistance, make his choice realistic.
.
.
Above, Justin samples my backyard range and 60 year old Remington 513T “Rangemaster”. He is an experienced hunter and skilled marksman. He nailed the yellow steel plate dead center, hit the remains of the Chinese multimeter barely visible in red, and went on the shoot the 1/4″ edge of a steel plate laying on top of the backstop, all off-hand.
.
.
Above, a smile while fitting a nose bowl and standard spinner. the mount looks low but it is taller than it appears, the crank is 45″ off the ground in wheel landing position. This will not be a clearance issue at all with a correct diameter prop. Notice how the gear and suspension angle was corrected since the first pictures 2 days ago. This is the kind of thing we can rapidly correct in the hangar.
.
.
Above, the satisfaction of progress, of having a plan come together. Later in the year, when the outcome of the Super Bowl has long faded, Justin will take his airplane out to the flight line for its first time. This will happen because he made a plan and decided he would work on his plane this day and spend the balance of it driving the 855 miles back home. He chose to do this rather than be a spectator today. Nothing wrong with having fun, but make sure it isn’t a poor substitute for what you really wanted to do this year.
