November 2, 2013 Leave a comment
November 2, 2013 Leave a comment
Here is a single location page that has a great number of links to information specific to the Zenith 601/650 / William Wynne-Corvair Combination. It is a particularly good match, we have a number of different ways to approach it that serve the needs of many different builders, and it is a success story that builds on our 10 year history of working with Zenith builders, starting with our own personal 601XL in 2003. Since then we have assisted more than 80 builders to complete and fly their Corvair powered Zeniths.
If you already are working on your Corvair, this page will have information you have seen already on our websites, but I have included it so that this page can function as a ‘stand alone’ guide for 601/650 builders who have just heard about our work with the Corvair. Our approach to serving builders is different than typical businesses geared only to sell things to consumers. Our goal is to assist you on your path to becoming a more skilled aviator. The products we sell support this, but simply getting you to buy things is not what I am in aviation to accomplish. If you would like to start with a simple three page spec sheet on the engine, read this link first: Basic Corvair information
This page is broken into the following sections:
2) Engine and build options
3) installation components
4) Support for builders
5) Flying 601/650s
6) Builders in process
7) 601/650 flight data and safety notes
8) who is WW?
9) Comments on dangerous trash.
At the end of each section there are links to supporting stories that have expanded information on concepts discussed in the section. Take your time and study it carefully.
I will be glad to answer further questions just email WilliamTCA@aol.com or call 904-529-0006. You can also check our two websites, https://flycorvair.net/ , http://flycorvair.com/ . The first is our ‘newspaper’ the second is our ‘library’ and ‘store.’ The links below are stories that already appear on these two sites, they are just arranged here to support this introduction to Corvair power for 601/650 builders.
Above, Phil’s Maxson’s 601XL airborne over the Florida coast at Ponce Inlet, 2006. Phil finished the plane in our Edgewater hangar and has been flying the plane ever since. It has proven to be economical and reliable over the long run. Phil is a skilled manager from the Fortune 500 world of business and could have purchased any engine on the market, yet he selected the Corvair as the best match to his personal goals of Learn Build and Fly.-ww
The Corvair has been flying since 1960, and I have been working with them as flight engines since 1989. It is a story of careful development and testing, a slow evolution to the engines we have today. It is ‘old and proven’ rather than ‘new and exciting.’ If that approach appeals to you, read on. There is a lot of material here, and it isn’t something you are going to absorb in one quick scan. Frankly, your engine selection deserves careful consideration, and it isn’t the kind of decision you should make based on a 4 page sales brochure.
Corvairs have proven themselves to serve a very broad variety of builders. Many alternative engine options for the Zenith are offered only as a “buy it in a box” import, more of an appliance than a machine, with little or no consideration of the builders, skills goals, needs, budget or time line. The Corvair has options to address these valid considerations, because your power plant should conform to you, not the other way around.
This said, Corvairs are not for everyone. In the 25 years I have been in the EAA and working with builders, the Corvair has always been very popular with ‘traditional homebuilders’, the people who have come to experimental aviation to discover how much they can learn, understand and master. The expansion of the EAA has brought more of these builders, but it has also brought a great number of people incapable of distinguishing between mastery of an aircraft or an engine and just merely being its buyer and owner. People who’s consumer mentality and short attention spans are better suited to toy ownership than mastery of skills and tools in aviation. Corvairs, and perhaps experimental aviation, are a poor match for such people. Many salesmen in our field will gladly sell anything to anyone with green money. I am an aviator, not a salesman, and the gravity of the subject requires more frank discussion and ethics than many salesmen bring to the table.
If you came to experimental aviation to find out how much you can master, not how little, then you are among the aviators who follow Lindbergh’s timeless 1927 quote: “Science, freedom, beauty, adventure: what more could you ask of life? Aviation combined all the elements I loved.” Even if you are brand new to aviation, I am glad to work with you. I have a long history of working with builders of all skill levels. We have a number of successful builders out flying their Zeniths who are the masters of both their airframes and engines, who had never changed the oil in a car before building their plane. If you got into experimental aviation just to buy stuff, then any salesman will do just fine for you. If you got into experimental aviation to learn, develop your own skills and craftsmanship and make things with your own hands, then who you work with really matters. You can’t become and old school homebuilder / motor head by buying things from salesmen. They have nothing to teach you. What you will do in experimental aviation is not limited by what you already know. It is only limited by what you are willing to learn, and selecting experienced people to learn from. If you are here to learn, I am here to teach. It is that simple.
a) – Complete Lindbergh quote is here: The Quote, 1927, C.A.L.
b) – Explanation of machines vs appliances : Machines vs Appliances Part #2
c) – Story of real engines vs ‘ideal’ ones: Unicorns vs Ponies.
d) – An example of our ling standing working relationship with Zenith: Friday out of shop until 4pm.
e) – A direct explanation of what makes my work different than typical LLC’s : 2011 Outlook & Philosophy
f) – A moving statement of philosophy: Sterling Hayden – Philosophy
Above, the 3,000 cc Corvair, configured for a Zenith 601/650. An inherently simple engine, It’s opposed six configuration makes it the smoothest of available power plants. It has outstanding cooling because GM put a tremendous amount of cooling fins on it and gave it a factory CHT redline of 575F. All of our engine parts are made in the United States.
2) Engine and build options:
If you are new to Corvairs, lets quickly cover some ground: General Motors made 1.8 million Corvairs. brand new parts, including billet cranks, forged pistons, valves bearings, virtually every single part inside is currently made and readily available, and will remain so. Rebuildable Corvair engines are plentiful, and much easier to find that Lycomings or Continentals. We have been working with Corvairs for 25 years, and there is no shortage of core engines or parts. If you doubt this for a second, Google “Corvair engine parts.”
The Corvair makes an outstanding aircraft engine because it is a simple, compact, direct drive, horizontally opposed six cylinder, air cooled engine. It is robust, and ‘flat rated ‘ from it’s automotive output. The engine runs equally well on automotive fuel and 100LL, and it does not care about ethanol. In its 53 year flight history, more than 500 experimental aircraft have flown on Corvair power.
The engine can be built in three dispacements with three respective power outputs. They are 2,700cc / 100HP, 2,850cc / 110HP and 3,000cc / 120HP. The two smaller displacements weigh 230 pounds, the larger actually weighs 8 pounds less because it uses lighter cylinders. All engines are completely rebuilt from very high quality parts before flight. They are not just removed from cars. The parts we use are specifically selected to convert the engine for the rigors of flight use. Forged pistons, Inconel valves, chrome rings, ARP rod bolts and many other components are upgraded in the rebuild.
To absorb the propeller and flight loads a “5th bearing” is added. It is a billet housing with a very large bearing from a V-8, bolted on the end of the case.The ignition is redundant and utilizes two 40,000 volt systems, one driven by digital electronics the size of a match book, the other by a traditional set of points. The engine is direct drive, it has no complex reduction unit. It makes good thrust because it has more than twice the cubic inches of a Rotax 912. All of the systems on the engine are intentionally patterned after those on Lycomings and Continentals, because they are the model of success in proven aircraft power plants. People who do not acknowledge certified engines as excellent models of success are often just zealots. To succeed in experimental aviation you need dispassionate information not emotional opinion.
One of the unique features of the Corvair is that it can be built at home, from our information and parts and a locally acquired rebuildable engine, or it can be purchased from us, test run with logs. 90% of current builders are building their own engine at home. Only 10% of the builders opt to have us build their engine. We have happy to serve both builders. In either case, Corvairs are the best match for builders who want to understand and be the master of their engine.
Because of the plans built vs production engine nature of the Corvair, there are large variations in how much builders budgets run. Below is a quick look at the differences. Keep in mind, these budgets are for first class, completely overhauled, zero timed engines with 5th bearings, starting, ignition and charging systems. We have clever builders who have built and flown engines for less than $3,000, but this not representative of main line builders. The numbers below are much better for Zenith builders to budget on.
2,700cc / 100HP typical homebuilders budget: $6,500- Same engine assembled and run from us $9,750
2,850cc / 110HP typical homebuilders budget: $7,500- Same engine assembled and run from us $10,750
3,000cc / 120HP typical homebuilders budget: $8,500- Same engine assembled and run from us $11,750
If you are attracted to the concept of building your own engine, but have not built motors before, Good. About half of our builders have never built any kind of an engine before. Our main work is teaching people what we know and providing the parts to work with. Our system does not require anyone to be a machinist nor to have previous engine experience.
The procedure of building an engine in your shop follows this format:
1) Get a conversion manual and DVD’s from us, use them to find a rebuild able core engine locally. Disassemble this engine following the steps in the DVD.
2) Send the crank and heads to our approved facilities for rebuilding and modification. They come back ready to ‘bolt on.’ Other parts of the engine are cleaned and inspected. The parts to convert the engine are ordered from us, many of the standard rebuild parts like lifters and gaskets are available from local auto parts stores. We do not ‘middle man’ anything you can directly buy.
3) Assemble these parts according to the manual and DVDs. There is no machine work required, only basic tools are needed, and a few specialty tools like a torque wrench. Many builders attend our free Corvair Colleges and directly learn hands on skills. You can even bring your parts and assemble them under our supervision, and test run your engine on our equipment. College attendance is a plus, but not required. Our methods work without direct training; a good number of engines are built and flown each year by builders who have never met me in person.
4) The test run serves several purposes. We teach people to build one of three specific models, and we teach them to use specific parts. Not only are these proven, but it also allows me to verify from a remote location that the engine was assembled correctly. A builder can report his static rpm, CHT, oil temp during the test run with his Warp Drive prop at the specified setting, and I can confirm the output and assembly of the engine without seeing it personally.
If you would like a sample of the information on working your way through the above four steps, get a look at this: Getting Started in 2013, part #1, Crankshaft process options.
I have broken down building a Corvair and installing it on your airframe into 42 “groups”. The previous link is about ‘Group 1000’ the crankshaft. If you would like to look at every part that goes into a Corvair, along with the conversion parts we sell, look at Groups 1000 -3300 at this link to our catalog: http://www.flycorvair.com/products.html
All builders get started with a conversion manual. The first part of the above link is about manuals and DVD’s. The direct link to the manual is: http://www.flycorvair.com/manual.html. almost all builders looking for a rebuild able engine also order the Disassembly DVD, which covers core engine selection visually. The direct link to it is: http://www.flycorvair.com/videov.html We encourage everyone to get started with information, even if you are pretty sure you would like to purchase a production engine from us. If you eventually buy an engine from us, we directly reduce the price to rebate all the money you spent on manuals and DVD’s.
a) – Corvair Weight story: Corvair vs O-200…. weight comparison
b) – Samples of our production engines: 2012 Corvair Engines For Sale: 100, 110 and 120 HP
c) – For an explanation of ‘flat rating’ and a Zenith engine build : Shop perspective: Mastery or ?
d) – A story about engines running on our hangar Dyno: http://www.flycorvair.com/thrust.html
e) Engine of builder now working on Zenith airframe: World’s Strongest 3,000cc Corvair, built by Greg Crouchley
f) 2.700cc engine we built for Becky Shipman’s 650: Shipman Engine at CC#22
g) A story about the evolution on 120HP Corvairs: 3,000 vs 3,100 cc Corvair engines.
Above, a 2009 photo from our workshop. I kneel in the workshop next to motor mount Number 100. This sounds like a lot, but I made the first one in 2003 for our own 601 XL. Most experimental aircraft companies, both large and small, fail because for two simple reasons; First, the ownership cannot physically make the product the sell, and second, their financial backers are unwilling to go several years before seeing the payoff. We succeeded because I am a craftsman first, and can make all the parts in the catalog, and we have never had, and would not accept having any partners nor investors. The Blue fixture is the one we use for the 601/650.
3) Installation Components for the 601/650:
We provide every single part it takes to install a Corvair in your 601/650. You can buy them one at a time, or all at once. Our Zenith 601/650 installation, which has been successfully flying for a decade, is a long proven system that has only seen a few very minor detail evolutions. Our Zenith installation manual detail how and why each of the installation components are installed on your airframe.
The installation does not require any modification to the airframe fuel system like most EFI engines do. Being air cooled and carbureted, it is one of the easiest engines to install. Many companies that are good at selling things are poor at teaching things, like how to install their products. Teaching is the very cornerstone of my work, I am a skilled writer, we run Corvair Colleges, and we have a simple engine. All this adds up to a comparitively easy engine to install. There is no need to rush it, but I can do it working in one long day.
Installation part numbers are Groups 3400 through 4300 in the second half of our numbering system. Get a look at this link: http://www.flycorvair.com/products.html From that list, you can see that the major installation parts for a 601/650 are: #3601(S) intake manifold, #3901(A) Stainless exhaust, #4002 spinner bulkhead, #4003 Warp Drive prop, #4101 baffle kit, #4102 nose bowl, #4103 cowl kit and a #4201(A) mount. The other smaller items listed are detail in our Zenith installation manual. All of the above parts have links to stories through the products page.
Many people new to building initially think that very economical engines like the Corvair must also be inexpensive to install. In reality, the cost of items like motor mounts and cowls are not affected by the cost of the engine they mount and house. A mount for a $30K UL-350 and a $7K Corvair have about the same amount to tubing and welding time in them, and thus cost about the same. Most engines for Zeniths have installation kits that run from $4,000 to $6,000. The Corvair is near the bottom of this range, but the savings of using the Corvair is in the engine, not the cost of installing it. Builders can save a significant amount of money by fabricating many of the parts like #4103, but most people are near the finish line at that point and opt to buy it and save the time. Exact cost on the installation parts varies a bit, I will be glad to review it with builders after they study the installation manual.
a) – For an example of 74 years of aircraft welding talent: Zenith 601/650 Motor mounts, P/N 4201(A)
b) – To learn about the Stainless exhausts we make: Stainless Steel Exhaust Systems
c) – Louis Kantor’s 601XL running for the first time in our front yard:
d) – The same aircraft on its first take off, from our airport. July 2009.
Above, 2004 at Oshkosh: Next to our personal Zenith N-1777W, I explain our dual ignition arrangement two executives from Falcon insurance, The EAA’s provider. To offer real support, an alternative engine provider must be an effective advocate for his builders on many fronts, including meeting the requirements of underwriters. Just being an engine guru is not nearly enough. Corvair engines that follow our design, including to ones assembled by builders, are fully insurable at the lowest rates, right from the first flight, because they have an outstanding safety record. Having good effective hands on support is a critical element in this outstanding record.
4) Support for Builders:
Beyond the basic engine and installation components, we offer many forms of support to Zenith builders:
a) We have a very detailed Installation manual for all Zeniths: http://www.flycorvair.com/601im.html We also have a flight operations manual with specific test flight plans and procedures: http://www.flycorvair.com/ops09.html
b) we hold 4 free hands on technical seminars called “Corvair Colleges” every year. This includes an annual College held in Mexico MO at the Zenith Factory timed to coincide with the factory open house in September. For an introduction to Colleges, read this link: http://www.flycorvair.com/cc21.html An overview of upcoming colleges is at this link: Upcoming events, Airshows and Colleges #26-28. If you would like to see video of a College, here is a link to Corvair College #17 http://www.youtube.com/watch?v=wfa85e3ibI4&playnext=1&list=PL1D40A102EC2A194D&feature=results_video
c) The “Zenvair” group is a separate on-line peer-to-peer discussion group just for Corvair/Zenith flyers to directly and freely share information and data with each other in a civilized productive format. The link is : ‘Zenvair’ Information board formed This is very effectively moderated by Zenith/Corvair builder and flyer Phil Maxson who’s 601 is pictured at the top of this page.
d) Woody Harris, subject of this story: Zenith 601XL-2,850cc, Woody Harris Is our west coast representative. Although we have held 5 Corvair Colleges in California, including 2 at Zeniths west coast facility Quality sport planes, we only make one trip to the west per year. Woody covers all the shows and events from Arlington to Copper State when we can’t be there.
e) I am the last guy in aviation who still makes free house calls. Over the years I have made more than 400 in person visits builders projects. I travel extensively, and go out of my way to include builders workshops on these trips. These stops and the colleges allow me to really understand the needs, strengths and dreams of rank and file builders that no one can read in email or at an airshow. for a sample, read this story: Corvair House Call, Range: 335 miles.
f) By my continued advocacy and industry relations, Corvairs have full insurance, at the lowest rates, available from a number of sources. If you would like to find out more Contact Bob Mackey, VP of Falcon insurance, The EAA’s designated provider, seen on the left in the photo above.
g) Over the years, we have built a very tight knit community of like minded builders. If you read this story about fools at our county airport: A visit to the insane asylum, and it sounds like your airport, and if your local EAA chapter is devoid of homebuilders and filled with negative people, you will find the Corvair movement to be a powerful antidote. Many Corvair builders catch several colleges a year, there they find positive, outgoing, energetic builders, effectively making the Colleges their “local EAA chapter” We have worked very hard to attract outstanding people interested in accomplishing their goals. I go out of my way to encourage new builders but I am intolerant of people who are compulsively negative. I am willing to be a cheerleader, but not a therapist.
Above is Rich Whittington’s fabulous looking 601 HDS at Corvair College #21. Our Conversion Parts work with all models of the 601 and the 650. One of the things I respect about Rich is his outspoken honesty. He started out with a criminally poor 2,700 made by a rip off artist in GA. To prevent other builders from making a similar mistake, he wrote a number of comments on this on Zenith Builders and flyers page. His second engine was a standard installation matched with a 3,000cc engine his is very pleased with.
5) Examples of flying Corvair Powered Zenith 601s and 650s:
In 2011, I wrote up a quick list of flying Zeniths, Since then a number have been added, but this list is a good beginning point, it has date of first flight and the N-number of these aircraft. Click on this link: List of Corvair Powered Zeniths
If you would like to get a look at pictures and short notes on a number of 601/650’s, click on this story link:
Below are a number of stories about flying planes. We get a steady flow of new flyers Like Jerry Baak and Pat Hoyt, whos names are not on the first list:
A really nice 2700cc tail wheel XL: New Zenith 601 XL(B), Conventional Gear, Jerry Baak, S.C.
Good looking 2,700cc plane in FL, story is about a house call: Flying 2700 cc Zenith 601 XL(B), Alan Uhr
Very nice looking 650, links to movies of plane: Zenith 650-2700cc Dave Gardea
Our west Coast rep, Woody’s plane: Zenith 601XL-2,850cc, Woody Harris also read the story: Woody’s 2,850cc Corvair/601XL hits 400 hours.
A plane seen at Brodhead, Oshkosh and the Zenith open house in 2013: Patrick Hoyt, new Zenith 601XL, now flying, N-63PZ
Story from the moderator of our “Zenvair” discussion group: Guest writer: Phil Maxson, flying a 3100cc Corvair in his 601XL
Story on a long time member of the Corvair Community: 601XL-2700cc Dr. Gary Ray
Story on a 500 hour 601 Tail Wheel aircraft: Zenith 601XL-3100cc Dr. Andy Elliott
Above, Making a house call in California to Larry Winger’s. His engine ran at Corvair College #18. Larry’s aircraft is a magnificent 650, built from plans, not a kit. The aircraft has since been completed and has been moved to the Chino airport. Larry exemplifies many of the finest qualities in homebuilding. When he started the project, he had never built an engine, a plane and was not yet a pilot. He has since accomplished all three.
6) Examples of Builders working on this Combination:
Many experimental aircraft companies like to tout how many of their product has sold as a measure of success. Sales numbers on only a measure of their success, not that of builders. The only number that counts are how many builders that make it all the way to flying and enjoying their creation. It is a fact of marketing that it is far easier to keep finding new buyers to spend money than it is to support the ones that already spent the money, all the way through flight. This is why many aircraft LLC’s have planned lifespans of only 48 months, so they make all the sales and fold up the tent before they have to do the real work of supporting builders.
We are very different. I have been supporting Zenith builders for a decade, but I have been working with Corvair builders since 1989. I am in this for the long haul, and my measure of success is getting people flying. We have many people working on Corvair powered 601s and 650s. In the first 10 years, we build and sold about 160 motor mounts for the combination. I didn’t make them just to have something to sell, I made them so that each builder would have a good shot at completing and flying his plane. I will be here long enough to support each of those builders in completing their plane. If you select a Corvair engine, I will be your ally in completing your plane, just as I have been for many others before you.
If your goal is to merely buy something, you need only find a salesman with an engine to sell. If your goal is to learn about, understand, build and fly your plane, you need an instructor-guide-mentor, an aviator not a salesman. Think it over: If your goal was to climb mount Everest, there would be plenty of people you could buy equipment from, but that isn’t the same thing as finding a Sherpa who has been to the top to act as your instructor and guide. A big part of why experimental aircraft have a 20% completion rate is that most people purchasing a kit or an engine have not spent 3 minutes learning how to differentiate between a salesman and a guide.
Below are a sample of our builders, each of whom I am going to see all the way through their aircraft finished and flying:
Nice guy who has been to many Corvair Colleges: Jim Waters 601XL-B project, “In The Arena,” Memorial Day 2013.
Our oldest builder in action :Dick Otto in California, S.R.B. (Senior Ranking Builder)
A letter from the same builder: Mail Sack – Letter of the month – Dick Otto, 601XL Calif.
A 2,700cc break in run on a 90% complete airframe: Weekend Double Header, 2nd engine of the year, Rick Koch
7) Operational Data for this combination:
If you would like to read a story about detailed flight data collection on a 2,850cc 750, check out this link: CHT part #5, flight data from Zenith 750 . It is an example of the type of information exchanged on our ‘Zenvair’ group. If you are attracted to a builders group that is made of intelligent thinking people, you will fit right in with Corvair builders.
If you would like a single example to effectively demonstrate that I am an aviator not a salesman, it is the type of data that I discuss with builders. No salesmen will acknowledge accidents nor difficulties that involved their products, even circumstantially.
Conversely, I am here to teach people what they need to know. I have a long history of writing about subjects that salesmen wouldn’t touch with a 10 foot pole. I write about accidents and friends I have lost, honest mistakes people made and things you can learn from them. Just about everything know in aviation cost someone dearly to learn. If you are unwilling to talk about these things in plain language, people are doomed to repeat them.
Risk Management, Judgement Error, money in the wrong place. is the story of our only fatal accident in a Corvair powered Zenith. (There is another below, but it was a different company) The NTSB pointed to an incorrectly assembled carb, but read the story and decide if judgment isn’t the root cause.
“If only someone had told him……” is a story about people who don’t listen. Guy A and Guy B were both Zenith 601 builders. Guy B was the passenger in the First 650 accident (AMD airframe- O-200 engine, ruled pilot error). Guy A was a well known and liked Zenith builder and flyer, who quit aviation after this incident.
Risk Management, Factor #1, Judgement. Covers how developing and exercising judgment is paramount to managing your own personal risk.
Risk Management, Experience vs Judgement. Ken Terry was a friend of mine and a huge influence on Grace’s flying, and her development as a pilot. The story is about how experience, even 40,000 hours of it is not a defense compared to exercising good judgment.
Dan Weseman and Dave Dollarhide having a good time at Sun n Fun 2013. They both are in the last story “Friday night” in the link “Three aviation stories”.
Three Aviation Stories covers my personal perspective on risk, and what level is worth managing, and how aviators come do deal with this. It speaks of meeting Al Haynes at two points in my life, 14 years and a world of experience apart. It also covers how several members of our EAA chapter each looked at loosing two friends.
Above, A photo taken at Sun n Fun 2006. My wife Grace Ellen and myself, in front of the first Corvair powered Zenith, our own N-1777W. The plane was the first XL model with conventional gear. Grace is a skilled pilot in her own right. She has been a pilot longer than I have, holds more advanced ratings and owns two aircraft. As a point of ethics, we do not promote, advocate nor sell things we have not personally flown behind.
8) Who is William Wynne?
Modern consumer sales logic dictates that that business should ‘de-personalize’ themselves so consumers find nothing objectionable about the provider while they are spending money. That model may work elsewhere, and even have advocates experimental aviation, but I don’t buy it. I contend that Aviation is a different arena, and who you are dealing with, and their ethics, experience and perspective matters.
Building a plane or an engine is a marriage of sorts between the builder and his airframe or engine company. I believe that it is best if everyone goes into it well informed with their eyes wide open. I am always surprised how few people even Google the name of a person they are thinking of working with. You don’t need to see eye to eye with them on every point nor even love them, but the relationship must absolutely have trust and respect operating in both directions. In 25 years I have seen many builders try to justify buying a product from a provider they didn’t really trust. It never works out. It doesn’t matter how good it looks, what it costs or how great it is supposed to work, if it is from a bad guy, it isn’t worth buying.
I could write a quick paragraph about how I am a pilot, a 22 year A&P mechanic, and that I hold both an AS degree in Maintenance and a BS in Professional Aeronautics (accident investigation) From the worlds #1 aeronautical university, Embry-Riddle , but I don’t think that any of that explains my commitment to builders nearly as well as the flying planes of our builders and things we have accomplished. Henry Ford said “A man can not base his reputation on what he says he will do; only what he has done.”
I am plain spoken. to understand why, read the ‘Effective Risk Management’ story below. I have many friends who are experienced aviators who value plain talk. This type of speech also tends to offend people who dabble in aviation and would rather read polite things that align with their pet opinions. I am in aviation to share experience builders need to know, not say things people want to hear. Below are a selection of stories, some humorous, but all with a point, that give people a better understanding of who I am. From there you can decide if you choose to work with me as your engine mentor.
9) Notes on trash from Bankrupt LLC’s:
Not all things called a Corvair represent my work or designs. Over the years, our success and willingness to share information has brought out a number of short lived LLC’s that were run by rip off artists, and mentally ill people. Particularly, there have been four businesses that made poor copies of our parts or untested garbage. All of these are bankrupt today. Because they were LLC’s they could take peoples money without any liability to repay it. Today, I have just heard that another is coming back with a new name. The story will never end as long as people don’t do their home work or believe that they are getting a bargain. You can read about one of these companies at this link: Cloudn’t have happened to a nicer guy……
I warn people all the time not to buy things from these people, or to buy this stuff at the flymart. For examples of things no one should have bought, look at this story: Built by William Wynne? Built according to The Manual?
Let me be absolutely clear, that I will be polite to people, but I will not work on, offer advice on, or help with products made by bankrupt people that I considered vermin. If you have one of the engines from these LLC’s you are out of luck. I will not allow you to join our ‘Zenvair’ group nor will I allow you to attend any of the Colleges. This isn’t out of spite, it is to protect these builders lives. They all want to put a band aid on their bad purchase and make it “good enough to fly.” A band aid isn’t going to do it, an amputation is in order. People who blew $12K on Junk don’t want to hear this, they are still looking for a cheap out that doesn’t exist. I will not assist them in the delusion that they have found one.
The Zenith Builders and flyers website has a small number of old posts from people who bought trash like this for their projects. If you look closely, these people offered great testimonials, but later abandoned their builds. On the same sites, I have builders like Larry Winger and Rich Whittington sharing that the same people took their money and delivered trash. Some people still don’t do their home work.
- March 2017
- February 2017
- January 2017
- December 2016
- November 2016
- October 2016
- September 2016
- August 2016
- July 2016
- June 2016
- May 2016
- April 2016
- March 2016
- February 2016
- January 2016
- December 2015
- November 2015
- October 2015
- September 2015
- August 2015
- July 2015
- June 2015
- May 2015
- April 2015
- March 2015
- February 2015
- January 2015
- December 2014
- November 2014
- October 2014
- September 2014
- August 2014
- July 2014
- June 2014
- May 2014
- April 2014
- March 2014
- February 2014
- January 2014
- December 2013
- November 2013
- October 2013
- September 2013
- August 2013
- July 2013
- June 2013
- May 2013
- April 2013
- March 2013
- February 2013
- January 2013
- December 2012
- November 2012
- October 2012
- September 2012
- August 2012
- July 2012
- June 2012
- May 2012
- April 2012
- March 2012
- February 2012
- January 2012