Over the years, we’ve built more than 100 high quality production engines for builders who opted to buy the finished product from us. Some of the best known flying Corvair engines were built in our shop. As a policy, every one of these engines are test run and broken in on our dynomometer/run stand. A review of our FlyCorvair.com and FlyCorvair.netWeb sites will show photos of dozens of engines we’ve built that are now flying. Our great experience with Corvairs, our use of only the highest quality parts and the test runs have given us a 100% track record with production engines. This record makes it easy to stand behind engines we’ve built. By and large, people who have selected our engines, installed them on their aircraft and operated them as we recommend have had to do no work other than regular oil changes and spark plug replacement at 200 hour intervals.
Many people who have selected a production engine still opt to attend the Collegesto get to know the inside of their Corvair engine. I absolutely encourage this because education has always been our primary work, and an educated Corvair pilot will not only have greater knowledge and confidence in his equipment, but will also offer valuable testimony to builders just considering the Corvair.
We have three different displacements/HP ratings available. Below we have three examples, one of each engine we have assembled, test run and delivered this year. If you have further questions about your application, feel free to write or call.
All of the engines we build are completely overhauled and modified with state of the art components made in the USA. Every engine has a forged crank that has been Magnafluxed, stress relieved, ground, balanced, nitrided, polished and balanced. Our engines are built on the readily available Weseman 5th bearing. We have built a number of other engines using our own bearing and the one from Roy’s, and we will gladly speak with anyone about using either of these bearings. We use the Weseman bearing as our standard offering because it is well proven on more than 100 engines and it is economical. Our bearing and Roy’s add $1,000 to the price of an engine.
The heads we use on our engines come from Mark at FalconMachine.net. I have been working with him for almost 10 years. His background as a Spartan-trained A&P mechanic, and a 32-year history of working with Corvairs led him to being the number one man in the world on cylinder heads for Corvair flight engines. He has worked directly with us over many years to fine tune every detail of head rebuilding and precision machining defines what state of the art is. Many of the successful flying Corvair powered planes today are utilizing his heads. Over the years he has produced more than 150 pairs of heads, and they enjoy a perfect track record.
Additionally, all of the engines have forged pistons, and the 2,850 and 3,000 have new cylinders. (The 2700 cylinders are re-bored GM originals.) They have forged rods with ARP bolts, harmonic balancers and high volume oil pumps. Each engine has dual ignition and electric startwith a 22 amp alternator. The engines have our gold oil system and the builder’s choice of billetor welded oil pan. (Heavy duty oil cooling systems are a popular $600 option.) The only major component not included is the carburetor. While any of the engines can be used on airframes as different as a KR-2S to a Zenith 750, the carb must be a good match for the airframe. For example, aircraft with low wings and fuel pumps require MA-3 or Ellison carbs, while gravity feed airframes can use a wide array of carbs, including the affordable Stromberg. The Corvair has flown on more than 15 different carbs, and we will be glad to assist you in choosing the correct one for your airframe.
Above, an engine we assembled for a builder at the beginning of 2012. The engine is on our run stand outside our hangar. Every engine we assemble is test run and broken in on our run stand. The engine’s performance is carefully evaluated against dozens of others we have built. This test run allows even fine details such as the hot idle regulated oil pressure to be preset before the engine is delivered.
Above, a picture of a 3,000 cc dished “Dual Fuel” forged piston. These are made in the USA to our exact specification. These pistons are the heart of 2,850 and 3,000 cc Corvair engines. They allow these engines to run equally well on 100LL or high grade automotive fuel. The design maintains a very tight quench area to the head while keeping a moderate static compression ratio. Many alternative engines have electronic elements and valve designs that are not compatible with the high levels of lead in aircraft fuel. Others have excessive compression ratios that make operation on fuel below 100 octane a serious detonation risk. No such issues exist with our Corvair conversions. When Corvairs were built, all automotive fuel was leaded; in the past 30 years they have proven to operate on unleaded fuel. Our 2,850 and 3,000 cc engines have these special pistons to maintain the ability of operating on either fuel. Corvair engines are not bothered by ethanol in fuel. The head in the picture was remanufactured by Mark at Falcon Machine.
Above, a look inside an engine during assembly in our hangar. As a direct drive, horizontally opposed, air cooled engine fed with a single carb, the Corvair engine is a model of simplicity and reliability. It has been powering experimental aircraft since 1960, and we have been continuously working with them since 1989. Many people new to homebuilding are taught by magazines to look at things which are “new and exciting.” All of my work in the past 23 years has been aimed at testing and developing proven methods and systems that builders can count on. “Old And Flight Proven” is the opposite end of the spectrum. It is my personal philosophy that many more homebuilders have been served by “Old And Proven.” Builders who understand this fundamental truth of aviation naturally gravitate to our work with the Corvair.
Below are three example of assembled engines we offer:
Above, Zenith 650 builder Becky Shipman and myself observe a break in run of her 2,700 cc engine at Corvair College #22 in Texas. This engine was assembled in my hangar before the event. Attending the event gave Becky a good look at what was inside her powerplant, and familiarized her with the operational procedures. We encourage builders purchasing an assembled engine from us to attend Colleges we offer. Read the whole story on Becky’s engine at the March FlyCorvair.net link
Above, Roger Grable and his grandson Graham stand by their new 2,850 cc engine during its break-in run at Corvair College #23 in Florida. I assembled the engine in our hangar before the event. Roger and his wife had attened CC#22 four months earlier, and had elected to have us build an engine for his fast moving project. We have a fairly short lead time on complete engines, and Roger drove to CC#23 and took delivery on the engine. There is an Internet based rumor that claims that we do not build engines or they take a long time to get. The three real world examples of engines we have built this year offer a reality check on such stories. To read the complete story on Roger’s Zenith 750 engine, follow this link to Corvair College on FlyCorvair.net in June
Above, a 3,000 cc engine we built for the Zenith 750 project of Lary Hatfield and sons. We met Lary at the Zenith open house at the factory, which he followed up by attending Corvair College #21. In person, Lary is an easygoing guy with a laid back approach on the surface. When you learn more about his experience, you understand that he and his sons have worked very hard and had outstanding success in very competitive levels of automotive racing. They are equally accomplished in aviation. They have worked hard enough to afford to put any piston engine they choose on the front of their Zenith, yet they selected a Corvair after careful consideration. I take it as a compliment to our work with the Corvair when men of their mechanical experience carefully evaluate and choose Corvair power. A longer story on their project can be found at:
A long time ago, I realized that a builder buying an engine from us was really purchasing more than a powerplant. He is making an investment in our judgement. Builders are looking for a good value in an engine, not the cheapest price. Airplanes are a lot of fun, but airworthiness is serious business. I appreciate this and cut no corners on engines that we build.
The single most important thing a builder can understand about our engine program is very simple, but often overlooked. Completed engines are a small portion of our efforts with the Corvair. Most of our work goes into teaching builders how to build their own engine and supplying the conversion and installation components. Carefully and correctly built engines actually are not a particularly lucrative part of our operation. We build them for several reasons beyond the bottom line: They are excellent demonstrators of the potential of the Corvair as we convert it; They provide a blueprint for builders assembling their own engines; and we often use them as assembly or test run demonstrators at Colleges. To serve the above purposes, they must be carefully built of the finest parts. Moral issues aside, there is absolutely no incentive in any form for me to cut any corner on any engine. A single issue in the field would undo the larger purpose of building the engines in the first place. We have been here for a long time, and every time I turn a wrench in the shop I am aware that I will be doing this in another 20 years also. There is no short cut to long term success.
Conversely, any company that makes its living just on complete engines, especially if it is an LLC, has an enormous incentive to cut corners on every part inside their engines. The only way they make money is by charging more, lowering their cost, or both. In tight economic times, price has a ceiling, so lowering the cost and cutting a few corners is the way to go. They can do the math, and every dollar they will ever make is based solely on this differential. They know that 9 out of 10 engines they sell will not go flying in the next 3 years. Organized as an LLC, they can walk away from the business without any financial obligation to their customers. If you’re new to aviation this may sound far fetched, but it is actually how the majority of alternative engine companies have been started, operated and dissolved in the past 20 years.
Our income is not based on the finite possibilities of the cost versus price equation. Our potential is directly related to the reputation that the Corvair enjoys as an affordable and reliable powerplant. The engines we assemble for builders enhance this reputation by being excellent examples of the conversion. Even the most cynical person who is yet to know my personal morality against poor products in experimental aviation can understand how we are only incentivized to build excellent engines.
If you are a builder interested in discussing an assembled Corvair for your project, let me suggest the following; take the time to read the stories in the links above. Also get a look at our main reference page, FlyCorvair.com. At the bottom of the main page is a search box that allows you to find any subject. The site has well over 1,000 pages of text. You don’t have to read it all (some of it is historical or dated), but you will find an excellent introduction to the engine. Then, write me with any questions you may have. Please include your phone number, and a good time to call you. We keep all the information confidential, but I find the phone a much faster way to cover builders’ questions. Understand that we get many emails every week asking about buying an engine. Some are scams, others are from 15-year-olds, some are from people asking if the engine will power a Lancair IVP, others asking what type of antifreeze goes in the engine. There may be one real builder in the group. In my experience, the real builder appreciates 30 minutes on the phone, and all the others want to have long protracted email exchanges. Set yourself apart, send your phone number.
As all of our engines are hand-built, I’ll be glad to discuss individual custom touches for builders ordering engines. A confirmed engine order requires a 50% deposit, and the balance must be paid before the engine is shipped. Crating and shipping are a modest, but additional cost. You can place your engine order with a check payable to William Wynne, 5000-18 US HWY 17 #247, Orange Park, FL 32003, or by credit card via PayPal to WilliamTCA@aol.com
Welcome to our new webstore.
Thanks for visiting! Dismiss